burkert 椭圆齿轮流量计8076_椭圆齿轮流量计_上海微通流体控制技术有限公司

产品详细

burkert 椭圆齿轮流量计8076

质量稳定：实行全过程质量监控，细致入微，全方位检测！
价格合理：高效内部成本控制，减少了开支，让利于客户！
交货快捷：先进生产流水线，充足的备货，缩短了交货期！

销售热线
021-37013235 13621973906

图文传真
37013235-818

产品描述服务承诺订货流程温馨提示

型号描述

8076 型流量传送器适合具备高粘度的介质，比如胶水、蜂蜜或机油。传送器由一个紧凑型 INLINE 接头 (S070) 和一个带盖的外壳 (SE36) 构成，通过一个卡口接头可以将两者快速、简单地相连。外壳包含电子设备模块和一个可拆下的指示器。设备也可在没有指示器的情况下工作，但为了对传送器进行编程（即数据参数化、标准参数复位、对在读取运行时应该输出的信息进行编程、访问代码、电流输出特性等），同时对测得的和处理的数据进行持续观察，要求存在指示器。8076 型设备的可用部件有：- 2 个可编程的输出端：一个晶体管输出端 (NPN) 和一个 4-20-mA 电流输出端（双线）- 3 个可编程的输出端：两个晶体管输出端 (NPN/PNP) 和一个 4-20-mA 电流输出端（双线）- 4 个可编程的输出端：两个晶体管输出端 (NPN/PNP) 和两个 4-20-mA 电流输出端（三线）8076 型设备能够转换测量信号，以不同尺寸单位显示不同数值（如果已插上显示模块）并计算通过一个或两个 M12 插拔连接器传输的输出信号。传送器具有一个或两个晶体管输出端，能够接通一个电子阀、激活一个警报并借助于一个或两个电流输出端 4-20 mA 建立一个或两个调节回路。

1）可编程的输出端：1 或 2 个晶体管输出端以及 1 或 2 个电流输出端 4-20 mA
2）可拆除的指示器，带有背景照明装置，适合流量和体积，带有两个数量计数器
3）通过 TEACH-IN 自动校准，检查所有无流量输出端

Type Description

This positive displacement flow transmitter with display Type 8076 is designed for use in slightly viscous fluid like glue, honey. The transmitter is made up of a compact fitting (S070) and an enclosure with cover, containing the electronic module. A removable display completes the transmitter. This ensemble (SE36) is quickly and easily connected to the fitting (S070) by a Quarter-Turn. The flow transmitter can operate without the display, but it will be required for programming the transmitter (i.e. set parameters, restore default parameters, programme information to be displayed, programme access code, adjust 4-20 mA output(s)...) and also for visualizing continuously the measured and processed data. The device Type 8076 is available with: - 2 programmable outputs: one transistor output (NPN) and one 4-20 mA current output (2-wire) - 3 programmable outputs: two transistor outputs (NPN/PNP) and one 4-20 mA current output (2-wire) - 4 programmable outputs: two transistor outputs (NPN/PNP) and two 4-20 mA current outputs (3-wire) The device Type 8076 converts the measured signal, displays different values in different units (if display mounted) and computes the output signals,which are provided via one or two M12 fixed connectors.Thanks to 1 or 2 transistor outputs, the transmitter can be used to switch a solenoid valve,activate an alarm and, thanks to 1 or 2 current outputs,establish one or two control loops.

1）Programmable outputs : one or two transistor output(s) and single or dual 4-20 mA current output(s)
2）Removable backlit display of flow rate and/or 2 two totalized volumes
3）Automatic-calibration: TEACH-IN, simulation of outputs signals provided without the need for real flow

专业制造、专业服务，微通为你创造更多价值

产品标准

售前服务

售中服务

售后服务

订货流程

订货须知